• Uses A, B, C Estes Motors
• Ejection Baffle (no wadding required)
• Comes with plastic nose cone, pre-cut plywood fins and rings, 15" plastic parachute kit.
• Over 35" Tall
• Basic Assembly Skills Required

Recommended Engines (apogee ft):

A8-3 (190) , B4-4 (440) , B6-4 (450) , C6-5 (900)

Specifications

• Length: 35.6" (90 cm)
• Diameter: 1.64" (42 mm)
• Weight: 6.6 oz. (187 g)

Description

Enjoy the fun and excitement of clustering, combined with a stylish split-fin design. Unleash the raw power of this flying model rocket with a cluster of three A to C motors. Push the launch button and watch it soar! No need to worry about the wadding; this kit comes with the ejection baffle !
The Cerberus stands nearly 3 feet tall. This rocket kit includes large self-adhesive decals and parachute kit for recovery.
While the motor mount assembly is different than non-cluster rocket kits, it is quite easy to build. There is no space for the motors clips and therefore motors are friction-fit.

Requires

• Assembly 
• Motor, Igniter 
• Launch System 
• Maxi Launch Rod
• Carpenter's glue
• Fine Sand Paper
• Utility or Hobby Knife
• Masking Tape (optional)
• Primer (optional) & Paint
• Fin Alignment Guide (optional)