Canadian Rocket Store

     

New Products

Black Brant III. Canadian Sounding Model Rocket. All included



This model kit of the Famous Canadian Sounding Rocket is now available as a combo! Everything included in this popular kit, including 3 A8-3 motors. Makes a great gift! This is the Skill Level 2 kit and will require 2-3 days to assemble. Launch pad and controller, glue, hobby knife, sandpaper, wadding, masking tape and paint can be used to build and launch other rockets. More information about individual products in the combo available below.

Flicker. Easy-to-Assemble All Inclusive Combo



One of the unique rocket sets is now available as a combo-package. Comes with 6 engines and everything else you need to build and launch this rocket LIGHTS, CAMERA, ACTION! Well almost. LIGHTS anyway! The Flicker is new and unique to Estes in that the nose cone lights up! Bright LED's light up the sky! Comes with a 15 inch parachute for ease of recovery. So come on, what are you waiting for? Get your Flicker today and let's light up the sky! Launch pad, controller, wadding and engines can be used to launch other rockets. More information about individual products in the combo available below.

Zombie. Easy-to-Assemble All Inclusive Combo



One of the best selling rocket sets is now available as all-inclusive combo-package. Comes with 6 engines and everything else you need to build and launch this rocket. Zombies, Zombies, Zombies everywhere! Powered by standard Estes engines, you can reach heights of 1100 feet! E2X means Easy to Assemble so you will be at the launch site in no time at all! All rocket parts are pre-colored and glue quickly together with some tube type plastic cement. Launch pad, controller, wadding and engines can be used to launch other rockets. More information about individual products in the combo available below.

Testors Flaming Orange Lacquer Spray Paint



Flaming Orange Lacquer Spray Pain. 3 oz (85 g)

New! Space Corps Corvette Class Rocket Kit

New! Space Corps Corvette Class Rocket Kit

Manufacturer: Estes
Retail Price: $30.41
Our Price: $27.95


Add to Cart


Skill Level: 3 Meet the Space Corps Corvette Class military craft, the first release in a new Estes series, the Estes Space Corps, this small but fierce reconnaissance vessel can travel to the far reaches of our solar system at near light speed to gather intelligence and intercept any threats when needed. Estes’ battle-ready Corvette can soar up to 650 feet on a C6-5 engine and will garner the attention of on-lookers on and off the flying field. As mankind further explores the exosphere, space enthusiasts and rocketeers from around the world will race to build and collect their own Space Corps military fleet. Specifications Length: 25 in (63.5 cm) Diameter: 1.33 in (34 mm) Estimated

New! Tazz Model Rocket Kit

New! Tazz Model Rocket Kit

Manufacturer: Estes
Retail Price: $30.41
Our Price: $25.75


Add to Cart


Skill Level: 3 The specially designed engine mount has two molded tabs that hold the wing elevators in the flat position during boost for nice straight-up flights. Then at apogee, the ejection charge kicks the engine mount out and “snap”, the two elevators move into the full “up” position and TAZZ spins like crazy on the way down! Slightly larger than the original “Gyroc” kit Estes produced in the 1960’s, this updated model features laser cut balsa wings with alignment tabs that fit into pre-cut slots in the body tube. This makes aligning the wings much easier during assembly and after the glue is dry, you also get a strong wing-to-tube glue joint. The clever molded

4" Bulk plate (P)

4" Bulk plate (P)

Manufacturer: Rocketarium
$3.35

Add to Cart


This bulkplate fits inside 4" Phenolic Tube. 1/4" plywood. Not for cardboard tubes (see previous) Note: The size specified is the size of the tube this bulkhead fits and is not an actual size of the bulkhead - 3.878",  0.25",  28g

Aeropack 38 mm Aluminum Retainer. L2



38 mm Aluminum Rocket Motor Retainer for Wildman "Thin-Wall" Fiberglass (1.602" OD) Precision Machined 6061-T6 Aluminum With Mil-Spec Type II Black Anodizing Large Quick-Turn Threads For Fast, Tool-Free Motor Change Installation: Simply Bond To Motor Mount Tube With JB Weld And You`re Done! Just Slide Motor In And Thread On Cap, That's It! Can Be Installed On Existing Rockets With Motor Mount Tubes Extending 3/8" Or More Below Lower Centering Ring

Pro24 6 Grain Motor Casing. Fits "G" Reloads

Pro24 6 Grain Motor Casing. Fits "G" Reloads

Manufacturer: Cesaroni Technology Inc.
$27.80

Add to Cart


Pro 24 6G Casing. Does not include Rear Closure (sold separately) Forward Closure is included in the reload kits. You only need the Casing, Rear Closure (P24-CL), Delay Adjustment Tool (P38-DAT) with 24 Centering Ring (P24-CR) and Any Pro24-6G Reload. Manufactured from thin-wall 6061-T6 aluminum tubing with a clear anodized coating for corrosion protection, Pro29 motor cases are lightweight but strong, capable of holding well over 3000 psi of internal pressure. The forward closure is retained by a formed rim at the head end of the casing. The rear of the casing has precision-machined internal threads. Don't forget that you'll need a delay adjustment tool for your Pro24 reloads, unless you

Pro24 3 Grain Motor Casing. Fits "F" Reloads

Pro24 3 Grain Motor Casing. Fits "F" Reloads

Manufacturer: Cesaroni Technology Inc.
$23.80

Add to Cart


Pro 24 3G Casing. Does not include Rear Closure (sold separately) Forward Closure is included in the reload kits. You only need the Casing, Rear Closure (P24-CL), Delay Adjustment Tool (P38-DAT) with 24 Centering Ring (P24-CR) and Any Pro24-3G Reload. Manufactured from thin-wall 6061-T6 aluminum tubing with a clear anodized coating for corrosion protection, Pro29 motor cases are lightweight but strong, capable of holding well over 3000 psi of internal pressure. The forward closure is retained by a formed rim at the head end of the casing. The rear of the casing has precision-machined internal threads. Don't forget that you'll need a delay adjustment tool for your Pro24 reloads, unless you