Canadian Rocket Store


1.6" Mini Tomach with FG Nose Cone Upgrade


1.6\" Mini Tomach with FG Nose Cone Upgrade

In Stock. Ships today

Skill Level: 3

Madcow Rocketry Mini Batray 1.6" diameter 3 fin rocket. The kit is complete with pre-slotted airframe plywood fins and centering rings, Kevlar/Nylon shock cord, 18" Nylon Chute and Chute Protector

  • Length: 40.5"
  • Diameter: 1.6"
  • Weight: 10 oz.
  • Motor Mount: 29 mm.
  • Recovery System: 18" Nylon Parachute. Nomex Heat Shield

This is an advanced kit.
You may need to adjust CG and either friction-fit your motor or use the retainer. Epoxy can cause an allergic reaction in some people. Adult supervision and wearing rubber gloves is recommended when working with epoxy. You need to sand the fiberglass nose cone and other fiberglass parts. Watch out for the fiberglass strands sticking up inside the nose cone - they are glass. Wear a particle mask to avoid breathing in the fiberglass dust.

Since this is an advanced kit, we expect you to have launch equipment and experience building and launching mid-power rockets.

Everything in this section is needed to build and fly this rocketPriceAdd to Cart
5 Min Quick-Cure Epoxy 4.5 oz$15.25Buy
4 Sanding sheets Grit 150 to 600$2.80Buy
Masking Tape$3.49Buy
F20-7W 29mm rocket motor 2 pack. 55Ns/2.8sec$47.00Out Of Stock
Complete Mid-Power Launch System$222.90Out Of Stock
Grey Primer$7.75Buy
Gloss Black Spray Paint$8.30Buy
Gloss Yellow Spray Paint$8.30Buy
UB1250 Sealed Lead Acid Battery, 12 Volts, 5 Ah$26.80Buy
29mm Plastic Rocket Motor Retainer (L). 2 pack$10.20Buy
Recommended MotorsPriceAdd to Cart
F20-7W 29mm rocket motor 2 pack. 55Ns/2.8sec$47.00Out Of Stock
F23-7FJ 29mm rocket motor 2 pack. 48Ns/2.2sec$47.00Buy
F50-6T 29mm rocket motor. 77Ns/1.4sec$29.25Buy
G80-13T rocket motor$31.50Buy
29/40-120 ReloadsPriceAdd to Cart
E23-5T 29/40-120 Reload Kit$15.75Buy
F22-7J 29/40-120 Reload Kit$18.75Buy
F40-7W 29/40-120 Reload Kit.$18.75Buy
 Assembly Instructions

  • Manufactured by: Madcow Rocketry