Canadian Rocket Store


1.6" Mini DX3 Dual Deploy Fiberglass Kit


1.6\" Mini DX3 Dual Deploy Fiberglass Kit


Madcow Rocketry Mini DX3 fiberglass 1.6" diameter 3 fin rocket. The kit is complete with pre-slotted lightweight thin-wall fiberglass airframe, Removable AV Bay, G10 fins and bulkplates and centering rings, Kevlar/Nylon shock cord, filament Wound FG nose cone


  • Length: 37"
  • Diameter: 1.6"
  • Weight: 16 oz.
  • Motor Mount: 29 mm.
  • 1/16" G10 Fins
  • Recovery System: No Parachutes Included
No electronics or ejection canisters are included. Please click here to see AV Bay assembly instructions.

This is an advanced kit

You may need to adjust CG and either friction-fit your motor or use the retainer. Epoxy can cause an allergic reaction in some people. Adult supervision and wearing rubber gloves is recommended when working with epoxy. You need to sand the fiberglass nose cone and other fiberglass parts. Watch out for the fiberglass strands sticking up inside the nose cone - they are glass. Wear a particle mask to avoid breathing in the fiberglass dust.

Since this is an advanced kit, we expect you to have launch equipment and experience building and launching mid-power rockets and therefore we do not provide the list of all required tools and materials for this rocket kit.

 Assembly Instructions

  • Manufactured by: Madcow Rocketry

Let us notify you when this product is back in stock!

Simply enter your details below and we will send you an e-mail when “1.6" Mini DX3 Dual Deploy Fiberglass Kit” is back in stock!

We will not send you any other e-mails or add you to our newsletter, you will only be e-mailed about this product!