Skill Level: 4

A very large (over 8-1/2 feet tall) model of the sustainer stage of Canada`s Black Brant 10 sounding rocket. Complete with "Kwik-Switch" motor mount, 0.093 G-10 lower fins, 0.062 canard fins, and tailcone! Plenty of room for a large payload too. Weighs approximately 107 oz. and flies on H through J motors.

Specifications

• Length: 103"
• Diameter: 4"
• Weight: 107 oz.
• Motor Mount: 54/38/29mm Kwik-Switch
• Recommended motors: H - J
• Recovery System: Piston, 50" Nylon Parachute
• Fins: Fiberglass
• Decals not included
• CP: 77" from the nose tip.
• Launch Lugs: 1/2"
• Payload Section: 31.75"

You may need to adjust CG and either friction-fit your motor or use the retainer. Epoxy can cause an allergic reaction in some people. Adult supervision and wearing rubber gloves is recommended when working with epoxy.
Recommended Motors and Altitude Chart

 Assembly Instructions