Canadian Rocket Store

     

Scooter 2.2" Model Rocket Kit [K-3113]

LISTING < PREV NEXT >

Scooter 2.2\" Model Rocket Kit
  

$65.60
In Stock. Ships Mar 25

Skill Level: 2

The Madcow Scooter is a classic-looking, stubby rocket with the capability of flying on D12's and at the same time the Scooter is a 29mm, mid-powered, solid-construction rocket that can reach 2,260 feet on a G64.
The rocket includes a pre-slotted 17" long, 2.2" diameter body tube, three through-the-wall laser-cut plywood fins and a 4.4" long balsa nose cone to make up the 22" length. The recovery system includes a Kevlar/Nylon shock cord, a Nomex parachute protector, and an 18" rip-stop nylon parachute. The remainder of parts include laser-cut plywood centering rings, eye-bolt (with nut and washers), a 29mm motor tube, two 1/4" launch lugs, and water-slide decals.


Specifications
  • Length: 22" (56 cm)
  • Diameter: 2.2"
  • Weight: 6 oz. (180 g)
  • Motor Mount: 29 mm.
  • Recovery System: Nylon Parachute
  • CG: 16" from the nose tip.

You may need to adjust CG and either friction-fit your motor or use the retainer. Epoxy can cause an allergic reaction in some people. Adult supervision and wearing rubber gloves is recommended when working with epoxy.


Everything in this section is needed to build and fly this rocketPriceAdd to Cart
5 Min Quick-Cure Epoxy 4.5 oz$15.25Buy
4 Sanding sheets Grit 150 to 600$3.00Buy
Masking Tape$3.49Buy
F20-7W 29mm rocket motor 2 pack. 55Ns/2.8sec$48.25Out Of Stock
Complete Mid-Power Launch System$221.90Out Of Stock
UB1250 Sealed Lead Acid Battery, 12 Volts, 5 Ah$26.70Buy
Recommended MotorsPriceAdd to Cart
F20-7W 29mm rocket motor 2 pack. 55Ns/2.8sec$48.25Out Of Stock
F23-7FJ 29mm rocket motor 2 pack. 48Ns/2.2sec$48.25Buy
G38-7FJ rocket motor$32.00Out Of Stock
G40-7W rocket motor$32.00Buy
G77-7R rocket motor$32.00Buy
29/40-120 ReloadsPriceAdd to Cart
F40-7W 29/40-120 Reload Kit.$19.25Buy
F52-8T 29/40-120 Reload Kit.$19.25Buy
G64-7W 29/40-120 Reload Kit.$21.50Buy
F22-7J 29/40-120 Reload Kit$19.25Buy
PaintPriceAdd to Cart
Gloss Black Spray Paint$8.30Buy
Grey Primer$7.75Buy
Gloss Yellow Spray Paint$8.30Buy
Upgrade ...PriceAdd to Cart
29mm Plastic Rocket Motor Retainer (L). 2 pack$10.60Buy


This rocket can also be launched with D12-5, E12-4 black powder motors, however 29 to 24 mm adapter is required.

 Assembly Instructions



  • Manufactured by: Madcow Rocketry